- Off-the-shelf high power filter for rated currents up to 2500 A
- HV versions applicable for IT power networks
- Busbars for convenient and universal electrical connection
- Protective plastic covers optionally available for unsurpassed safety
Performance indicators
Maximum continuous operating voltage |
3x760/440 VAC (FN 3359 HV) |
Nominal operating voltage |
690V VAC (FN 3359 HV) |
Rated currents |
150 to 2500 A @ 50°C |
Overload capability |
4x rated current at switch on, |
Operating frequency |
DC to 60 Hz |
High potential test voltage |
P –> P 3270 VDC for 2 sec (FN 3359 HV) |
Temperature range (operation and storage) |
-25°C to +100°C (25/100/21) |
Protection category |
IP 00 |
Flammability corresponding to |
UL 94 V-2 or better |
Design corresponding to |
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 |
MTBF (Mil-HB-217F) |
>130,000 h @ 50°C/690 V |
Approvals & Compliances
Features and Benefits
- High-power filter for Class A compliance. With approval measurement also Class B compliance possible for some applications
- Extremely compact high-current filter solution with minimum space requirement
- FN 3359 HV versions are applicable for IT power networks
- Optionally available transparent protective covers for all filters up to 1000 A, to protect the installer, operator or inspector from undeliberate touching of life conductors. They can easily be retrofitted even if the filter is already installed and connected
- FN 3359 also improves conducted immunity of installations
Typical Applications
- High-power motor drives, inverters and converters
- Industrial three-phase systems
- Entire factories, plants and installations
- Large UPS
- Machinery
- Mining equipment
- Photovoltaic systems with galvanic isolation*
- Wind turbines
* For EMI solutions for PV system without galvanic isolation, please contact your local Schaffner partner